PA-600/720/1000DP - WEBSITE X5 UNREGISTERED VERSION - Miro-Tronics

Go to content

Main menu:

PA-600/720/1000DP

Public Address Systems > Amplifiers > Power Amplifier
 

Feature

- Automatic variable speed fan control by thermal sensor 25V,35V,50V,70V
  and 100V outputs for matching of speaker   imedance (Optional)
- Designed for operation either AC main or 24V DC
- Optional FAULT DETECTOR MODULE (FD-200) makes monitoring of
 
amplifiers  and loudspeaker line (short, open) failures
- An override relay contact on the output terminal board allows emergency
  paging to be distributed through 3 wire or 4 wire system wiring that
  
requires the DC power supply
- Optional FAULT DETECTOR MODULE (FD-200) makes detection of
  
speaker line fault or amplifier fault and change from fault amplifier into
 
stand-by amplifier by FAULT STAND-BY SWITCHER UNIT (FS-3381)
- Full protection for product reliability
     Over load and speaker line short limiter circuit
     Over current limiter circuit
     In rush current protection circuit for AC POWER
- +24V DC OUT to external accessories (MAX. 500mA)
- AC power remote control (Stand-by LED)
- PGM audio muting level controller when priority control signal input
- Override audio input terminal and override control terminal
- 200Hz filter to improve sound quality
- Screw terminal for signal input to make an easy installation
- OPTIONAL FAULT MONITORING MODULE (FM-300)
     Fault monitoring of fan fault, DC fuse fault and AC fuse fault
     P.C.L protection adoption

Specification :


Model :
              PA-600DP      PA-720DP         PA-1000DP
Rated Output         600W(RMS)   720W(RMS)      1000W(RMS)
Output Impedance   
50V(4.2Ω)     50V(3.5Ω)        50V(2.5Ω)
                            
70V(8.2Ω)     70V(6.8Ω)         70V(4.9Ω)
                           
100V(16.7Ω)  100V(13.9Ω)      100V(10Ω)
Power Consumption   1650W         1890W              2630W
1/8 Power Current draw  3A            3.8A                  5.4A
1/3 Power Current draw  
5A            5.8A                  7.7A
Rated Power Current draw 8A           9A                    12A
Weight(kg)                    
20Kg         20Kg                 25Kg
Frequency Response  Less than -3dB (35Hz ~ 20KHz)
Signal to Noise Ratio  More than 100dB ("A" WEIGHT)
THD at 1kHz  Less than 0.4%
Input Filter (H.P.F)  400Hz / -3dB
Input Sensitivity/Impedance  0dBu(0.775V)/ 60kΩ BALANCED
Power  AC220V/60Hz, DC24V
Dimensions (m/m)  483(W)x 133(H)x 377(D)m/m

 
Back to content | Back to main menu